Treatment · YAG laser

YAG laser in Singapore: what an Nd:YAG laser treats, and what to expect

YAG laser usually means an Nd:YAG laser. The same wavelength does very different jobs depending on how long each pulse is, from fading pigment to reducing hair.

Medically reviewed by Dr Sin Yong, medical adviser · Last reviewed 20 November 2026

Quick answer: Yag laser in Singapore

  • A YAG laser usually means an Nd:YAG laser, which emits light at 1064 nm, or at 532 nm when the frequency is doubled.
  • Very short pulses break up pigment and tattoo ink. Long pulses heat hair follicles. The pulse length decides the use.
  • It is used for laser toning, sun spots, deeper pigment, tattoos, carbon laser peels and laser hair removal.
  • The 1064 nm wavelength is less absorbed by surface pigment, which is why it is widely used on Asian and darker skin.

On this page

  1. What is a YAG laser?
  2. What a YAG laser is used for
  3. Is a YAG laser suitable for Asian and darker skin?
  4. What a session involves, and the downtime
  5. YAG laser price and booking at SkinRev Lab

Updated

What is a YAG laser?

In aesthetic practice, a YAG laser nearly always means an Nd:YAG laser. It produces light at 1064 nm, and at 532 nm when the frequency is doubled. What the laser does depends on the length of each pulse.

  • Very short pulses, measured in nanoseconds (Q-switched) or picoseconds, break pigment and tattoo ink into smaller particles that the body clears.
  • Long pulses, measured in milliseconds, heat the hair follicle and are used for hair reduction.

So a "YAG laser" is a family of treatments and not one treatment. A pico laser is often an Nd:YAG laser with picosecond pulses. An Er:YAG laser is a different laser altogether, at a wavelength absorbed by water, and is used for resurfacing. Our comparison of pico and Q-switched lasers explains the difference in pulse length.

At SkinRev Lab, laser treatments are carried out by Dr Sin Yong, and the device and settings are chosen at the assessment.

What a YAG laser is used for

What a YAG laser is used for
UseHow it is doneTypical course
Laser toning for uneven toneLow-energy passes at 1064 nmA course spaced one to a few weeks apart, then maintenance
Sun spots and frecklesTargeted short pulsesOften one to three sessions
Deeper pigment and melasmaGentle, conservative settingsA longer, spaced course
Tattoo removalShort pulses matched to the ink colourA longer course, spaced weeks apart
Carbon laser peelCarbon lotion on the skin, then laserA short course
Laser hair removalLong pulses at 1064 nm, often alongside a 755 nm Alexandrite laserSessions over several months

A YAG laser does not remove moles. Any brown spot that has changed, bleeds or looks irregular is examined first, and is not treated with a pigment laser.

Is a YAG laser suitable for Asian and darker skin?

The 1064 nm wavelength is absorbed less by the pigment at the surface of the skin than shorter wavelengths are. More of the energy passes through to the target beneath. This is the main reason it is widely used for Asian and darker skin tones, both for pigment and for hair removal (Battle and Hobbs, Dermatologic Therapy, 2004).

It does not remove the risk. Darker skin is more prone to darkening after any inflammation, and repeated toning at high energy or short intervals has been linked with small white spots (Chan and colleagues, Lasers in Surgery and Medicine, 2010). Conservative settings, sensible spacing and daily sunscreen matter more than the device.

Treatment is postponed on recently tanned skin, over an active infection or inflammation, and during pregnancy for elective treatment. Tell Dr Sin Yong about any medicine that makes the skin sensitive to light.

What a session involves, and the downtime

  1. Assessment. The concern is examined, and the pulse type, wavelength and energy are chosen.
  2. Preparation. The skin is cleansed, photographs are taken, and protective eyewear is worn.
  3. Treatment. Toning feels like light, warm snaps. Targeted spots and tattoo treatment are sharper, and a comfort cream can be applied first.
  4. Aftercare. Sunscreen every day, and a review before the next session.
What a session involves, and the downtime
TreatmentUsual downtime
Laser toningRedness for a few hours
Targeted sun spotsThe spot darkens, then flakes away over about a week
Hair removalRedness and small bumps around the follicles, usually settling within a day or two

Side effects include redness, warmth, pinpoint bleeding and light crusting. Less common are blistering, darkening that returns after treatment, and white spots from over-treatment. Contact the clinic about blisters, crusts that weep, or new dark patches.

YAG laser price and booking at SkinRev Lab

SkinRev Lab is at #B1-28 CityLink Mall, 1 Raffles Link, linked underground to City Hall MRT and Esplanade MRT, and is open daily from 11am to 8pm.

YAG laser treatment is a medical treatment. It is carried out by Dr Sin Yong and always starts with a consultation, where the area is examined, your medical history is taken and the plan is explained before anything is agreed. It is priced at consultation, because the cost depends on what is found at that examination. The treatment, the area and the number of sessions decide the quote.

To arrange a consultation, message us on WhatsApp at 8266 9585 with your concern and the days that suit you. Prices for our non-medical treatments are on the price list.

Common questions

Your questions,
answered

Is a YAG laser the same as a pico laser?

Not exactly. Nd:YAG describes the laser crystal and its wavelength. Pico describes the pulse length. Many pico lasers are Nd:YAG lasers that fire picosecond pulses, so a treatment can be both.

What is a Q-switched Nd:YAG laser?

It is an Nd:YAG laser that fires very short nanosecond pulses. It has been used for many years for pigment, laser toning and tattoo removal.

Can a YAG laser be used for laser hair removal?

Yes. A long-pulsed 1064 nm Nd:YAG laser heats the hair follicle, and is often chosen for darker skin tones, sometimes alongside a 755 nm Alexandrite laser.

How long is the downtime after YAG laser?

After toning, redness lasts a few hours. Targeted spots darken and flake over about a week. After hair removal, redness and small bumps usually settle within a day or two.

How often can I have YAG laser toning?

Toning is given as a course spaced one to a few weeks apart, followed by maintenance. Dr Sin Yong sets the interval, because toning too often or at high energy raises the risk of white spots.

Can a YAG laser remove moles?

No. Pigment lasers are not used on moles. A brown spot that has changed, bleeds or looks irregular is examined first.

How much does YAG laser treatment cost?

It is priced at consultation at SkinRev Lab. The cost depends on the treatment, the area and the number of sessions.

Medical journal references

Peer-reviewed background reading for this page. These papers report research in groups of people and do not predict an individual result.

  1. Lee YS, Lee YJ, Lee JM, et al. The Low-Fluence Q-Switched Nd:YAG Laser Treatment for Melasma: A Systematic Review. Medicina (Kaunas). 2022;58(7). PubMed
  2. Zhang B, Xie B, Shen Y, et al. Single and combined 1064 nm Q-switched Nd: YAG laser therapy in melasma: A meta-analysis. J Cosmet Dermatol. 2022;21(9):3794-3802. PubMed
  3. Lee SJ, Seok J, Jeong SY, et al. Facial Pores: Definition, Causes, and Treatment Options. Dermatol Surg. 2016;42(3):277-85. PubMed
  4. Wu DC, Goldman MP, Wat H, Chan HHL. A Systematic Review of Picosecond Laser in Dermatology: Evidence and Recommendations. Lasers Surg Med. 2021;53(1):9-49. PubMed

Also searched as: Yag laser in Singapore

Related: Pico laser downtime
Home Pico laser YAG laser in Singapore: what an Nd:YAG laser treats, and what to expect