Guide · Silicone and non-absorbable filler

Silicone, PMMA and gel filler years later: lumps, migration, inflammation and what removal involves

Fillers the body does not absorb can stay quiet for many years and then cause lumps, swelling or movement. They cannot be dissolved, so the plan starts with finding out exactly what is there and where, and surgery is often part of the discussion.

Medically reviewed by Dr Sin Yong, medical adviser · Last reviewed 17 November 2026

Quick answer

  • Non-absorbable fillers such as liquid silicone, PMMA and polyacrylamide gel are not broken down by the body, and problems can appear many years after injection.
  • The usual late problems are lumps, filler that has moved away from where it was placed, and swelling or inflammation that comes and goes.
  • An enzyme (hyaluronidase) dissolves hyaluronic acid filler only; it does not dissolve silicone, PMMA or polyacrylamide gel.
  • Ultrasound is usually the first scan, MRI can help where questions remain, and a tissue sample confirms what a lump contains.
  • Surgery is often discussed because it is the main way to take these materials out, but it cannot always remove everything, and a quiet filler may be better left alone.
  • Get same-day care for a hot, painful, growing lump or fever; for skin that turns pale, white or dusky, or severe pain, get help at once; for any change in vision, call 995 or go to A&E.
  • At SkinRev Lab, Dr Sin Yong assesses the area, scans it with ultrasound where useful, dissolves any hyaluronic acid layered on top and refers to a plastic surgeon or dermatologist for removal; SkinRev Lab does not perform surgery.

On this page

  1. Silicone, PMMA and polyacrylamide gel: why problems can appear years later
  2. Lumps, migration and inflammation: what the problems look like
  3. Why the enzyme does not dissolve these fillers
  4. What imaging and assessment come first
  5. Why surgery is often discussed
  6. When surgery is the right answer
  7. Inflammation and infection around old filler
  8. What SkinRev Lab can and cannot do
  9. What to bring for a second opinion
  10. Warning signs: when not to wait

Updated

Silicone, PMMA and polyacrylamide gel: why problems can appear years later

Silicone, PMMA and polyacrylamide gel are non-absorbable fillers: the body does not break them down, so they stay in the tissue, and problems can begin many years after an injection that caused no trouble at the time. Many people who have them were treated a long time ago, sometimes overseas or by someone who was not a doctor, and some were never told what was used.

  • Liquid silicone: injected as an oil, often in many small droplets.
  • PMMA: tiny plastic beads carried in a gel that is absorbed, leaving the beads behind.
  • Polyacrylamide gel: a water-rich gel that can form soft collections.

Why late problems happen: the body walls off material it cannot remove, and over years this can tighten, harden or become inflamed. A review of granulomas after filler notes that they may occur 10 to 15 years after injection of silicone fluids (Lee and Kim, 2015), and a dermatology report describes onset anywhere from months to many years after silicone injection, often with flares and quiet periods (Park and colleagues, 2016).

This page goes into what these problems look like, what is checked before removal and what removal can achieve. For an overview of all fillers that cannot be dissolved, including collagen stimulators, see non-dissolvable filler removal.

Lumps, migration and inflammation: what the problems look like

Late problems from non-absorbable filler usually show as a lump, as filler found away from where it was placed, or as swelling and redness that come and go. How they look differs a little between materials.

MaterialHow late problems can lookWhat is reported
Liquid siliconeRelatively soft, fixed lumps with swelling and rednessGranulomas years later; silicone is known to move to other areas (Lee and Kim, 2015; Park and colleagues, 2016)
PMMAHard, sometimes bluish lumpsFirm, scar-like granulomas, appearing months after injection or later (Lee and Kim, 2015)
Polyacrylamide gelFirm areas or soft collections; swelling; lumpsIn one series of 20 people, firm, non-tender areas appeared 10 to 28 months after injection (Kavoussi and Ebrahimi, 2012)

Migration: a review of filler migration describes presentations ranging from nodules to tumour-like masses, some with inflammation, swelling and pain, and notes that movement often goes unnoticed until a lump, swelling or cyst develops (Wollina and Goldman, 2023). For migration with any filler, see filler migration.

Not every lump is the filler. Cysts, swollen glands and other growths can appear in the same places, which is one reason imaging comes before any decision.

Why the enzyme does not dissolve these fillers

An enzyme (hyaluronidase) breaks down hyaluronic acid, and silicone, PMMA and polyacrylamide gel are not hyaluronic acid, so the enzyme has nothing to act on. This is the main reason correction of these fillers is planned differently, and it is worth being clear about it from the start.

  • No injection dissolves them: there is no equivalent of dissolving for non-absorbable fillers.
  • Massage, heat and home remedies do not break them down, and pressing on an inflamed lump can make it worse.
  • Mixed areas are common: hyaluronic acid filler is sometimes added on top of old silicone or PMMA years later. That hyaluronic acid part can be dissolved, and doing so can show how much of the problem is the older material.
  • Adding more filler to disguise a lump or a hollow over old non-absorbable filler needs particular caution, so always mention old treatments.

For how dissolving works where hyaluronic acid is present, see dissolving filler.

What imaging and assessment come first

Before any removal is planned, the aim is to know what the material is, where it sits and how far it has spread, because that decides whether removal is possible and what it would involve. The assessment starts with your history and an examination, then imaging.

  • Ultrasound first: a review describes ultrasound as the first-line imaging method for detecting and identifying cosmetic fillers, partly because injection histories are often hard to obtain (Wortsman, 2015). On ultrasound, silicone oil and PMMA tend to look bright, while hyaluronic acid looks dark (Wollina and Goldman, 2023). It also shows depth and the vessels nearby.
  • MRI where questions remain: MRI can locate filler and help identify its type (Wollina and Goldman, 2023). A radiology review notes that silicone has distinctive MRI features, while many other fillers look similar to each other because of their high water content (Mundada and colleagues, 2017).
  • Scans done for other reasons: fillers are common incidental findings on MRI and PET-CT, and the same review explains that their usual appearance should not be mistaken for disease (Mundada and colleagues, 2017). Telling the radiologist about old filler helps.
  • A tissue sample: examination of tissue is described as essential for final confirmation of what a lump contains (Wollina and Goldman, 2023).
  • Tests for infection: where a lump is hot, tender or discharging.

You can see what a filler scan looks like in the ultrasound filler mapping video.

Why surgery is often discussed

Surgery is often discussed for non-absorbable fillers because it is the main way to take the material out of the body. A review of filler migration found that surgery was the treatment of choice for these fillers, and explains why removal is hard: the particles become held in a framework of the body's own collagen, which becomes tighter with time (Wollina and Goldman, 2023).

What removal can involve, depending on the material:

  • Cutting out a defined lump of silicone or PMMA, or a localised hard granuloma.
  • Draining polyacrylamide gel: in one series, firm areas of gel were drained through a needle opening under local anaesthetic, and 19 of 21 resolved in one session (Kavoussi and Ebrahimi, 2012). A single case report describes gel removed from the forehead 12 years after injection, through two small cuts (Mo and colleagues, 2019). These are small reports.
  • Laser-assisted removal: a technique that breaks up PMMA beads with a laser and removes them through a fine suction tube has been described (Wollina and Goldman, 2023).
  • Removal during a facelift: in a series of 50 people who had old filler of this kind removed during facelift surgery, 62% were satisfied at follow-up (Alaslawi and colleagues, 2022).

The limits are real. Silicone injected as fine droplets can spread, which can make complete removal impossible, and excision may cause further disfigurement, so it is an unlikely option for many facial silicone granulomas (Park and colleagues, 2016). Granulomas have ill-defined borders, so excisions tend to be incomplete and can leave scars (Lee and Kim, 2015).

When surgery is the right answer

Surgery is the right answer for many problems from non-absorbable filler, and choosing it after a careful assessment is a sound decision rather than a last-ditch one. A surgical opinion is usually the right next step when:

  • The material forms a defined lump or collection that imaging shows could be reached and removed.
  • A gel collection could be drained.
  • A localised hard lump has not settled with medical treatment.
  • Infection or an abscess keeps returning around the filler.
  • There is doubt about what a lump is, and a sample is needed.
  • A facelift is being considered anyway, and accessible filler could be removed at the same time.

When surgery may not be the right answer: the filler is quiet, causing no symptoms and not bothering you; it is spread so widely that removal would do more harm than good; or the area is one where a scar would be a bigger problem than the filler. A review of overfilling describes surgical correction as particularly suitable where filler is difficult to break down or has formed nodules (Peng and colleagues, 2025), but that does not mean every non-absorbable filler needs to come out.

A plastic surgeon or dermatologist with experience of filler complications is the right person to weigh removal. For questions to ask before agreeing to it, see told you need surgery to remove filler.

Inflammation and infection around old filler

Swelling, redness or pain around old non-absorbable filler is treated first as possible infection or inflammation, and it needs a doctor's assessment rather than waiting. Flares can follow an illness, dental treatment or a new injection nearby, and they can settle and return.

  • Polyacrylamide gel: a review of granulomas advises that inflamed lumps after this gel should be treated as suspected infection, and should not be treated with the anti-inflammatory medicine usually injected into other granulomas (Lee and Kim, 2015).
  • Silicone: flares are usually managed with medicine, relapse has been reported when treatment is reduced, and long-term results are often not reported (Park and colleagues, 2016).
  • An abscess: may need draining, which is a smaller procedure than removing the filler.

Medicines for these flares are a specialist decision, and you should not treat yourself. For infection after any filler, see filler infection, and for granulomas, filler granuloma.

What SkinRev Lab can and cannot do

At SkinRev Lab, Dr Sin Yong, medical adviser, can assess problems from non-absorbable filler, scan the area and arrange the right next step, but SkinRev Lab cannot dissolve these fillers and does not perform surgery. Being clear about both helps you use the visit well.

What SkinRev Lab can do:

  • Take a full history and examine the area at rest and in movement.
  • Scan with ultrasound where useful, to show where material sits, how deep it is and whether hyaluronic acid is also present.
  • Dissolve hyaluronic acid filler layered on or beside the older material, with an enzyme (hyaluronidase), in stages.
  • Advise whether a quiet filler is better left alone.
  • Refer you to a plastic surgeon or dermatologist for removal, a tissue sample or specialist treatment, and explain what further imaging such as MRI might add.

What SkinRev Lab cannot do:

  • Dissolve silicone, PMMA or polyacrylamide gel; no enzyme does.
  • Remove them surgically; see what we do not offer.
  • Take the material out with laser or other energy treatment. Time Freeze Laser LCLR, which Dr Sin Yong uses for a microliposuction-like effect, is not a way to remove silicone, PMMA or polyacrylamide gel; where an area looks over-full from hyaluronic acid filler or a collagen stimulator, it may be considered after examination. This is Dr Sin Yong's clinical approach; no published trial has tested it for filler, and results vary. Hard, red, painful or growing lumps need medical review, not laser.

Assessment and correction are priced at consultation. For how SkinRev Lab approaches filler problems generally, see filler correction at SkinRev Lab.

What to bring for a second opinion

Old non-absorbable filler is often poorly documented, so anything you can bring helps, but an assessment can go ahead without it.

Checklist:

  • Records: any notes, receipts or letters from the clinic, even if it has closed.
  • Product name: the brand or material, if known, and where you were told it was from.
  • Dates: roughly when each injection was done, and where in the world.
  • Areas: every area treated, including later hyaluronic acid top-ups and any dissolving.
  • Photos: from before the filler, from when the problem began and recent ones in daylight.
  • Scans: ultrasound, MRI or CT reports, and the images if you have them.
  • Results: any biopsy, culture or blood tests, and letters from surgeons or dermatologists.
  • Your health: medicines, allergies, autoimmune conditions and any recent illness or dental work.

For what a second-opinion visit involves, see filler second opinion.

Warning signs: when not to wait

Most old filler problems are not emergencies, but some signs need same-day or immediate care.

What you noticeWhat it may meanWhat to do
A cool, firm lump that has not changedFiller walled off by the bodyRoutine doctor review; do not squeeze
A lump that becomes red, warm, tender or largerInflammation or infectionSee a doctor within a day or so; do not massage
Spreading redness, pus or feverInfectionSame-day medical care; A&E if you feel unwell
Severe or rising painInfection, or a blocked vessel after a recent injectionUrgent care now
Skin turning pale, white (blanching), dusky or mottledPossible blocked blood vesselContact the provider who treated you immediately, or go to A&E
Any change in visionEmergencyCall 995 or go to A&E at once

A blocked blood vessel is almost always linked to a recent injection, so it is unlikely from old filler alone; it matters if anything new has been injected nearby.

Sources

References & sources

  1. Lee JM, Kim YJ. Foreign body granulomas after the use of dermal fillers: pathophysiology, clinical appearance, histologic features, and treatment. Arch Plast Surg. 2015;42(2):232-239. doi:10.5999/aps.2015.42.2.232.
  2. Park ME, Curreri AT, Taylor GA, Burris K. Silicone granulomas, a growing problem? J Clin Aesthet Dermatol. 2016;9(5):48-51.
  3. Wollina U, Goldman A. Filler migration after facial injection: a narrative review. Cosmetics. 2023;10(4):115. doi:10.3390/cosmetics10040115.
  4. Wortsman X. Identification and complications of cosmetic fillers: sonography first. J Ultrasound Med. 2015;34(7):1163-1172. doi:10.7863/ultra.34.7.1163.
  5. Mundada P, Kohler R, Boudabbous S, Toutous Trellu L, Platon A, Becker M. Injectable facial fillers: imaging features, complications, and diagnostic pitfalls at MRI and PET CT. Insights Imaging. 2017;8(6):557-572. doi:10.1007/s13244-017-0575-0.
  6. Kavoussi H, Ebrahimi A. Delayed gel indurations as an adverse effect of polyacrylamide filler and its easy treatment. Dermatol Res Pract. 2012;2012:539153. doi:10.1155/2012/539153.
  7. Mo YW, Lee DL, Shin HK, Jung GY. Polyacrylamide hydrogel (Aquamid) filler removal after a decade. Arch Aesthetic Plast Surg. 2019;25(3):115-118. doi:10.14730/aaps.2019.01697.
  8. Alaslawi AAF, Zeina AM, Zahra T. Facelift surgery after permanent filler: outcomes after removal of permanent filler under local anesthesia. Plast Reconstr Surg Glob Open. 2022;10(8):e4459. doi:10.1097/GOX.0000000000004459.
  9. Peng CX, Xv W, Ao YJ. A review: causes, consequences, and management strategies of facial overfilling. Clin Cosmet Investig Dermatol. 2025;18:1857-1864. doi:10.2147/CCID.S539888.

Common questions

Your questions,
answered

Can silicone filler be dissolved?

No. An enzyme (hyaluronidase) dissolves hyaluronic acid filler only, and silicone, PMMA and polyacrylamide gel are not affected by it. If hyaluronic acid has been added on top of old silicone, that part can be dissolved. Otherwise, the options are leaving it alone, medical treatment of inflammation, or removal by a surgeon.

Can silicone filler be removed from the face?

Sometimes. A defined lump or collection can often be removed surgically, but silicone injected as fine droplets can spread, which can make complete removal impossible, and excision can leave scars. Imaging first shows where the material is, which helps a surgeon judge what can realistically be taken out.

Why has my old filler caused a lump after so many years?

Fillers the body cannot absorb are walled off, and over years this can tighten, harden or become inflamed, sometimes after an illness or dental work. Granulomas after silicone have been reported 10 to 15 years after injection. A new lump can also be something other than filler, so it should be examined.

What scan do I need for old silicone or PMMA filler?

Ultrasound is usually the first scan, because it shows where filler sits and how deep, and can suggest the type. MRI can help where questions remain, and silicone has distinctive features on it. A tissue sample confirms what a lump contains. Tell any radiologist about old filler.

Does old non-absorbable filler always need to be removed?

No. A filler that is quiet, causes no symptoms and does not bother you may be better left alone, because removal carries its own risks and scars. Removal is usually considered for lumps, repeated inflammation, infection, migration that bothers you, or when there is doubt about what a lump is.

Can SkinRev Lab remove silicone or PMMA filler?

No. SkinRev Lab does not perform surgery, and no enzyme dissolves these fillers. Dr Sin Yong can assess the area, scan it with ultrasound, dissolve any hyaluronic acid layered on top and refer you to a plastic surgeon or dermatologist for removal or specialist treatment. Assessment is priced at consultation.

When is a problem with old filler urgent?

Get same-day care for a lump that becomes hot, red and painful, or for pus or fever. Skin that turns pale, white, dusky or mottled, or severe pain, needs help at once. For any change in vision, call 995 or go to A&E immediately.

How much does silicone filler removal cost?

Removal of permanent fillers is usually surgical and quoted by the surgeon. At SkinRev Lab, assessment by Dr Sin Yong, including ultrasound where useful, is priced at consultation.

Medical journal references

Peer-reviewed background reading for this page. These papers report research in groups of people and do not predict an individual result.

  1. Medeiros CC, Cherubini K, Salum FG, de Figueiredo MA. Complications after polymethylmethacrylate (PMMA) injections in the face: a literature review. Gerodontology. 2014;31(4):245-50. PubMed
  2. Narins RS, Beer K. Liquid injectable silicone: a review of its history, immunology, technical considerations, complications, and potential. Plast Reconstr Surg. 2006;118(3 Suppl):77S-84S. PubMed
  3. Baranska-Rybak W, Lajo-Plaza JV, Walker L, Alizadeh N. Late-Onset Reactions after Hyaluronic Acid Dermal Fillers: A Consensus Recommendation on Etiology, Prevention and Management. Dermatol Ther (Heidelb). 2024;14(7):1767-1785. PubMed
Home Filler correction Silicone, PMMA and gel filler years later: lumps, migration, inflammation and what removal involves